Molded Plug Adapters, Pins NEMA 5-15P, 2-Pole 3-Wire Grounding
Industrial Fluorescent Luminaire Series FEN, Wet & Damp Locations, 40°C Ambient Temperature, IP65
Harsh Environment Wet Light Utility fluorescent Fixture, EWL Series
Flat Travel Plug Adapters, 2 Pins, Non-Grounding
Series 67 Snap-In Receptacles, 15A-125Vac, for Cutout 0.77" x 1.07" (19.6 x 27.2)mm, Panel Thickness 0.032" to 0.070" (0.81 to 1.78)mm
Series 49 Snap-In Receptacles, 15A-125Vac, for Cutout 0.968" x 0.968" (24.6 x 24.6)mm, Panel Thickness 0.032" to 0.070" (0.81 to 1.78)mm
Thermoplastic Portable Cord, Type SVT 18/2 Conductors, 300 Volt, Applications: Vacuum Cleaners, Food Mixers, Office Equipment
Non-detachable Power Supply Cords, 1.End molded Plug NEMA 1-15P (non-polarized), Type SVT/SJT Cord
Explosion-Proof High Pressure Sodium Luminaires, Series LMV, 35W to 150W, Stanchion Mount, Cl. I, Div 2, Groups A, B, C, D, NEMA 3, 3R, 4, 4X, IP66
Industrial Steel Emergency Lighting Units, 120Vac/277Vac, min. 90 Minutes Illumination, UL listed. Meets UL 924, NFPA 101, NEC and OSHA illumination standards
Emergency Lighting, Square Series ELSQ/ELSQM, Surface/recessed Mounting, meets UL924, NFPA 101, NEC and OSHA illumination standards
Air Horns Models 3H & 6H, Hazardous Location, NEMA Type 4X, indoor/outdoor Use
Sound Projectors, for use with Vibratone Horns
QUICKTRONIC® High Efficiency (QHE) Instant Start DULUX L 40W (DL40) Ballasts for 1-3 Lamps, Universal Voltage Systems (120V-277V), Normal Ballast Factor, for Primary Lamp Type: FT40DL, UL, CSA, RoHS compliant
Industrial Power Fuses, UL Class RK5, 250V and 600V AC, 0.1 to 600 Amperes, MIL-Spec WF1814, Dual Element Fuses
Hook-Up Wires, MTW, TFFN, TFF, TW, THW, TEW, AWM Style 1015, 1028, 1230, 1231, 1232, 1283, 1408, 1452, 1841, 10269
Portable Safety Transformers, 100VA to 4000VA, Safety Class II
Midget Fuses, TRON FNQ Series, 500 Volt AC, 0.100A to 30A. Low cost supplemental protection of transformers and relays at 500V or less for circuits with in-rush currents. Typical Applications: Control Transformer 480V Primary Protection, Lighting Circuit Protection, Meter Circuits.
Midget Fuses, FLQ Series, 500 Volt AC, 0.100A to 30A. These time-delay fuses provide excellent supplemental protection of control power transformers, solenoids, and circuits with high inrush currents. UL and CSA 500 volt ratings permit use on 480 volt circuits. FLQ fuses also provide supplemental protection to small motors.
Midget Fuses, AMP-TRAP ATQ Series, 500 Volt AC, 0.100A to 30A. An excellent choice for supplemental protection of circuits up to 30A where the available short circuit current does not exceed 10, 000A. (Not for Branch Circuit Protection).
Showing newest 20 of 33 documentations out from 2013/06 — Show all…