|
|
|
| Industrial Pin & Sleeve Devices |
| IEC 60309 Plugs, Connectors, Inlets and Receptacles |
| 20 Amp, 30 Amp, 60 Amp, 100 Amp, for use in North America |
|
|
|
| Features and Benefits |
|
| • | Rugged housing, made of superior performance PBT, provides maximum corrosion protection and makes the device more resistant to impact, abuse and temperature extremes. V-0 flame rated and superior UV stability. |
|
| • | Contact carrier resists arcing and internal heat build up; 60 and 100 amp contact/pin carriers are made of reinforced nylon for even greater strength and temperature resistance. |
|
| • | Zinc-plated steel terminal screws on 20A through 60A devices. |
|
| • | Stainless Steel terminal screws on 100A devices. |
|
| • | Dependable, clean brass construction for long life, reliable electrical contact, maximum conductivity, and corrosion resistance. |
|
| • | Watertight chloroprene onion skin grommet provides a precise, reliable seal at the cable entry point. |
|
| • | Ground, neutral and phase terminals are clearly identified by color coding or letters and numbering on both front and back sides. |
|
| • | Multiple contact points assure a continuously reliable electrical connection. |
|
| • | Engineered to IP67 watertight and IP69K high-pressure, high-temperature washdown standards. |
|
| • | North American Rated Devices Series II 20, 30, 60 and 100 Amp. |
|
| • | Meets North American IEC 60309-1 and 60309-2 Standards. |
|
| • | UL Listed for both 50 and 60 Hz applications. |
|
|
| No ingress of dust; complete protection against contact (dust tight). |
| Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion). |
|
|
|
|
|
| No ingress of dust; complete protection against contact (dust tight). |
| Tested with powerful high temperature water jets. |
| Protected against close-range high pressure, high temperature spray downs. |
|
|
Catalog Numbering System
for North American (IEC 60309 Series II) Devices |
|
| The catalog numbering system is easy to use. Each letter or number provides a description of the product. Simply follow the six-part code below, made up of letters and numbers. Each catalog number contains the number of conductors, amperage rating, device type, clock position of the ground sleeve, and environmental rating. For example, the catalog number below refers to a 5-wire, 20 amp receptacle with a grounding sleeve located at the 9 o’clock position and an environmental classification of watertight. |
|
|
|
|
|
|
|
5
1st digit |
|
| 3 = 3 wire |
| 4 = 4 wire |
| 5 = 5 wire |
|
|
|
|
|
20
2nd-4th digit |
|
| 20 = 20 Amp |
| 30 = 30 Amp |
| 60 = 60 Amp |
| 100 = 100 Amp |
|
|
|
|
|
R
Letter |
|
| P = Plug |
| C = Connector |
| R = Receptacle |
| B = Inlet |
MI = Mechanical Interlock,
Non-fused |
MF = Mechanical Interlock,
Fused |
|
|
|
|
|
9
Clock Position |
|
| 4 = 4 hour |
| 5 = 5 hour |
| 6 = 6 hour |
| 7 = 7 hour |
| 9 = 9 hour |
| 12 = 12 hour |
Specifications and information are nominal and are subject to change without notice.
|
| Features and Benefits |
|
• | Rugged housing, made of superior performance PBT, provides maximum corrosion protection and makes the device more resistant to impact, abuse and temperature extremes. V-0 flame rated and superior UV stability. |
|
• | Contact carrier resists arcing and internal heat build up; 60 and 100 amp contact/pin carriers are made of reinforced nylon for even greater strength and temperature resistance. |
|
• | Zinc-plated steel terminal screws on 20A through 60A devices. |
|
• | Stainless Steel terminal screws on 100A devices. |
|
• | Dependable, clean brass construction for long life, reliable electrical contact, maximum conductivity, and corrosion resistance. |
|
• | Watertight chloroprene onion skin grommet provides a precise, reliable seal at the cable entry point. |
|
• | Ground, neutral and phase terminals are clearly identified by color coding or letters and numbering on both front and back sides. |
|
• | Multiple contact points assure a continuously reliable electrical connection. |
|
• | Engineered to IP67 watertight and IP69K high-pressure, high-temperature washdown standards. |
|
• | North American Rated Devices Series II 20, 30, 60 and 100 Amp. |
|
• | Meets North American IEC 60309-1 and 60309-2 Standards. |
|
• | UL Listed for both 50 and 60 Hz applications. |
|
|
|
|
