Turnlok® Extra-Hard Use Plugs and Connectors |
4 Wire 20 & 30A; 125 & 250V, 3ø 250 & 480V, 3øY 120/208V |
Targeted Countries: North America |
|
|
|
Applications |
|
Industrial, Retail, Health Care, Office, Education, Hospitality/Lodging, Institutional |
Tough enough for Industrial Environments. |
|
Every component of these durable Turnlok® locking plugs and connectors are built to offer the lowest installed cost with maximum durability. Quick-thread assembly screws install four times faster than competitive product and backed-out screws come ready-to-wire. The rugged easy-to-grip nylon housing, clear thermoplastic terminal chambers as well as high-strength brass alloy blades and contacts combine to give the premium selection of Turnlok® plugs and connectors. |
|
|
Features & Benefits |
|
|
|
|
Product Selection Table |
|
Plugs IP20 Suitability, Black Housing, White Front Body, Cord Dia. 0.225" to 1.150" (5.7-29.2)mm |
|
|
|
|
Ampere |
Phase |
Volt AC |
|
Catalog No. |
|
|
|
20A |
3Ph Y |
120/208V |
|
L1820P |
|
|
|
30A |
3Ph Y |
120/208V |
|
L1830P |
Connectors IP20 Suitability, Black Housing, White Front Body, Cord Dia. 0.225" to 1.150" (5.7-29.2)mm
|
|
|
Ampere |
Phase |
Volt AC |
|
Catalog No. |
|
|
|
20A |
3Ph Y |
120/208V |
|
L1820C |
|
|
|
30A |
3Ph Y |
120/208V |
|
L1830C |
Specifications and information are nominal and are subject to change without notice. Contact our sales office for additional information.
Turnlok® Extra-Hard Use Plugs and Connectors |
4 Wire 20 & 30A; 125 & 250V, 3ø 250 & 480V, 3øY 120/208V |
Targeted Countries: North America |
|
|
|
Technical Information |
|
|
3rd Party Compliance |
|
• | UL Listed, File Number E146159, Standard UL498, Attachment Plugs and Receptacles |
|
• | Federal Specification WC596 |
|
• | CSA Certified, File Number LR1765, Standard CSA-C22.2 No. 42, General Use Receptacles and Attachment Plugs |
|
• | Conforms to NEMA WD-1 and WD-6 |
|
|
Electrical |
• | Dielectric Withstand Voltage: 2200V minimum |
|
• | Maximum Working Voltage: 600VAC |
|
• | Current Interrupting: Certified for current interrupting at full-rated current |
|
• | Temperature Rise: 30°C maximum after 50 cycles at 150% rated current |
|
|
Mechanical |
• | Cord Accommodations: Round portable service cords of diameters in accordance with the device rating as defined in UL62 |
|
• | Cord Grip Accommodations: 0.225" to 1.150" diameter (5.7-29.2)mm |
|
• | Terminal Identification: "GR" and Green color = Ground; "WH" and White color = Neutral; "X", "Y", "Z" = Hot |
|
• | Terminal Accommodation: #18 AWG min. to #8 AWG max. |
|
• | Product Identification: Amperage, Voltage, 3rd Party Compliance, NEMA Configuration hot stamped onto device |
|
|
Environmental |
|
• | Operating Temperature: Maximum continuous +75°C, minimum -40°C without impact |
|
|
|
• | Back Body: Super Tough Nylon |
|
|
• | Terminal Chamber: Polycarbonate |
|
|
|
|
|
• | Connector Contacts: Brass |
|
• | Terminal Clamp: 20A = Nickel-Plated Steel, 30A = Brass |
|
|
|
• | Cord Clamp Screws: Nickel-Plated Steel |
|
• | Assembly Screws: Nickel-Plated Steel |
|
|
|
Dimensions Nominal: inch (mm) |
|
|
|
|
|
|
|
20A and 30A Plug
20A and 30A Connector
Specifications and information are nominal and are subject to change without notice. Contact our sales office for additional information.
|
|