Company contact details More product information
Further Products and Accessories
| Catalog number | PS620PA | Description | Armored Grounding Plug, 20 Amp, 250 Volt AC, NEMA 6-20P, 2-Pole 3-Wire Grounding (2P+E), Medium Duty, Metal Armored White Rugged Nylon Construction, UL/CSA, Ref. PS620PACC20 USA, Canada | EDP Number | | stock availability | Special order, please check alternate products or contact us | GENERAL NOTES Non stock products are procurement goods, can only be ordered in standard packaging quantities and have a minimum order value. The actual product may differ from the illustration shown. The information provided here is subject to change without notice. The product availability is continuously updated every 15 minutes on working days. The product shown is for the use in the specified country. If no CE reference is included in the product description, the use of this product within the European Union or the CE marking itself is not permitted. The use of non-compliant equipment within the European Union is prohibited by law. SAFETY NOTES Installation may only be carried by people (qualified electricians) with relevant electrical engineering knowledge and experiences! DISPOSAL INFORMATION Must not be disposed with household waste! WEEE No.: DE 54087582 — Information provided in compliance with §18 paragraph 4 sentence 3 WEEE Directive available at www.bmuv.de |
|
How do i get a graphical snapshot of this information?
General description for a Windows operating system:
Simply hold down the [Alt] key and then press the [Print] key, then release the keys.
It has done nothing! - what's happened?
You have copied a graphical snapshot of the visible information in your browser window into your computer′s clipboard. The picture from the clipboard you can use with any graphics program.
Of course you can paste the contents from the Clipboard in Word or other programs directly. If you do not know how you can paste the clipboard′s contents, just use the following keystrokes: [Ctrl] [V] for the "paste"-function.
Click to close the help screen…
Product Information 128058Sourced from www.biaonline.com
USA, Canada |
|
|
|
|
Armored Grounding Plugs and Connectors, PSPA/PSCA Series |
|
|
Features and Benefits |
• | Armored Grounding Plugs and Connectors in white with two poles and three wires. |
|
• | Armored housing automatically grounded. |
|
• | Rugged nylon construction provides impact and chemical resistance. |
|
• | All 3-wire terminals are located on the same plane, allowing for quick wire termination from any angle. |
|
• | Tri-drive assembly screws are standard. |
|
• | Cord Range Outer Diameter: 0.250" to 0.585" (6.4 to 14.9)mm |
|
|
|
|
|
|
Selection Chart |
|
Catalog No. Plug |
Catalog No. Connector |
|
Catalog No. Plug |
Catalog No. Connector |
|
15 Amp, 125V NEMA 5-15 and 250V NEMA 6-15 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PS615PA |
PS615CA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 Amp, 125V NEMA 5-20 and 250V NEMA 6-20 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PS520PA |
PS520CA |
|
PS620PA |
PS620CA |
|
| Catalog numbers in bold indicates active products in this group. Contact our sales office for the others. |
|
|
|
|
|
|
Installation Instructions, PSPA/PSCA Series |
|
Cord range: 18/3 SV to 12/3 SJ-SH; .250" to .585" diameter (6.4 to 14.9)mm |
|
WARNING: IMPROPER WIRING OF ANY ELECTRICAL DEVICE CAN CAUSE SERIOUS INJURY OR DEATH. THESE WIRING DEVICES SHOULD BE INSTALLED ONLY BY AN ELECTRICIAN OR OTHER QUALIFIED PERSON. MUST BE INSTALLED AND USED IN ACCORDANCE WITH ELECTRICAL CODES. |
|
IMPORTANT: Turn circuit breaker OFF or remove fuse(s) and test that power is off. |
|
NOTICE: Use this device with copper or copperclad wire only. |
|
1. Loosen cord clamp screws and remove front section. |
2. Thread wire through bushing in cord clamp. If wire is too large for bushing, remove and discard. |
3. WIRE PREPARATION: Remove jacket on 7/8". Strip each wire 5/16" and twist strands. DO NOT TIN CONDUCTORS. |
4. WIRE TERMINATION: Insert green (grounding) wire under green, black (hot) wire under brass, white (neutral) wire under silver screw clamps and tighten securely. No loose strands. |
5. ASSEMBLY: Slide cover up cord and over wire body. Tighten assembly screws, securely attaching body to cover. Tighten cord clamp screws securely. |
|
|
|
|
Specifications and information are nominal and are subject to change without notice.
Representative images and Product infos. (Click the image or the reference no. for more information.)